Owners Manual - Specifications
Back to Table of Contents
Specifications for the Landscape & Irrigation Model (9HP)
Description and Intended Use:
The TRENCH'N edge Landscape & Irrigation Model is a gasoline powered trencher. It is designed to be pulled along a planned path at properly prepared worksite. Its purpose is to dig a shallow trench for use in residential and commercial landscape construction. The trench is dug 5" inches wide at a variable depth to 6" inches deep. Optional equipment can be installed to change the trench size to 2-1/2" inches wide with a variable depth to 7" deep. The trench is used for the placement of brick edging, plastic edging, lawn irrigation components, low-voltage landscape lighting, or footings for small landscaping walls. Never use the TRENCH'N edge for any use it is not intended or designed for.
| Engine |
9 HP |
| Operating Speed |
Up to 25 Feet Per Minute, (7.62 Meters Per Minute) Varies With Ground Conditions |
| Trench Size |
Up to 5" Wide x 6" Deep ( 12.7 cm x 15.24 cm) |
| Optional Trench Size |
When equipped with the optional 2" chuck (part number 15003) the trench size changes to 2-1/2" inches wide by a maximum of 7" inches deep. |
| Trencher Teeth |
Up to 8 Replaceable Carbide Tips. Mounted in Forged Holders |
| Discharge |
Right or Left Hand Side - Displaced Soil Can Be Discharged Into or Out of Beds, From Either Direction |
| Drive |
Double V-Belt With Idler Clutch |
| Dimensions: |
|
| Length |
60" Inches (1.52 Meter) |
| Width |
25" Inches (0.635 Meter) |
| Height |
30" Inches (0.762 Meter) |
| Weight |
225 Pounds (102.1 Kg) |
| Shipping Weight |
275 Pounds (124.7 Kg) |
| Shipping Dimensions |
58" x 25" x 30", 25.2 Cubic Feet (1.47 Meter x 0.635 Meter x 0.762 Meter, 0.714 Cubic Meters) |
Specifications for the Irrigation & Deep Drain Tile Model (13HP)
Description and Intended Use:
The TRENCH'N edge Irrigation & Deep Drain Tile Model is a gasoline powered trencher. It is designed to be pulled along a planned path at properly prepared worksite. Its purpose is to dig a shallow trench for use in residential and commercial Irrigation construction. The trench is dug 2-1/2" inches wide at a variable depth to 12" inches deep. Optional equipment can be installed to change the trench size to 1-3/4" inches wide with a variable depth to 12" deep. The trench is used for the placement of lawn irrigation components, low-voltage landscape lighting, or drain tile. Never use the TRENCH'N edge for any use it is not intended or designed for.
| Engine |
13 HP |
| Operating Speed |
Up to 20 Feet Per Minute, (6.1 Meters Per Minute)
Varies With Ground Conditions
|
| Trench Size |
Up to 2-1/2" Wide x 12" Deep ( 6.35 cm x 30 cm) |
| Optional Trench Size |
When equipped with the optional narrower chuck
the trench size changes to 1-3/4" inches wide by a maximum of
12" inches deep.
|
| Trencher Teeth |
Up to 8 Replaceable Carbide Tips. Mounted in Forged Holders |
| Discharge |
Right or Left Hand Side - Soil Can Be Discharged Either Direction |
| Drive |
Double orTtriple V-Belt With Idler Clutch |
| Dimensions: |
|
| Length |
70" Inches (1.77 Meter) |
| Width |
25" Inches (0.635 Meter) |
| Height |
38" Inches (0.96 Meter) |
| Weight |
345 Pounds (124.7 Kg) |
| Shipping Weight |
410 Pounds (154.3 Kg) |
| Shipping Dimensions |
72" x 25" x 40", 41.7 Cubic Feet |
|
